show vlanauthorization

Use this command to display the VLAN Authorization settings.

Syntax

show vlanauthorization [port-list] | [all]

Parameters

`port-list`	(Optional) Displays the port(s) VLAN Authorization settings.
all	(Optional) Displays all port(s) VLAN Authorization settings.

Defaults

If no parameters are specified, all VLAN Authorization configuration information will be displayed.

Mode

All command modes.

Example

This example shows how to display VLAN Authorization configuration information for ports ge.1.1-3:

System(su)->show vlanauthorization ge.1.1-3
 VLAN Authorization Global Status:  enabled
 VLAN Authorization Table   :
 Port       Status       Admin Egress   Oper Egress    VLAN ID
--------------------------------------------------------------
 ge.1.1     enabled      untagged       untagged       4094
 ge.1.2     disabled     untagged       untagged       none
 ge.1.3     enabled      untagged       untagged       unknown

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback