clear antispoof ip-inspection

Use this command to reset anti-spoofing IP address inspection to the default value on a port or range of ports.

Syntax

clear antispoof ip-inspection port-string

Parameters

port-string The port on which anti-spoofing IP address inspection is cleared.

Defaults

Anti-spoofing IP address inspection is disabled on all ports by default.

Mode

All command modes.

Examples

This example shows how to reset anti-spoofing IP address inspection on ports ge.1.2 through ge.1.5 to the default value of disabled:

System(rw)->clear antispoof ip-inspection ge.1.2-5