Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set flowlimit shutdown

Use this command to enable or disable the flow limit shut down function.

Syntax

set flowlimit shutdown {enable | disable}

Parameters

enable | disable Enables or disables the flow limit shut down function.

Defaults

None.

Mode

All command modes.

Usage

When enabled, this allows ports configured with a “disable” action to shut down. For information on using the set flowlimit limit command to configure a disable action on a port, refer to set flowlimit limit.

Example

This example shows how to enable the flow limit shut down function:

System(rw)->set flowlimit shutdown enable
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page