Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear radius-snooping port

Use this command to clear RADIUS-snooping configuration for all or the specified ports.

Syntax

clear radius-snooping port [port-string]

Parameters

port-string (Optional) Specifies a specific port to clear.

Defaults

If no port is specified, configuration is cleared on all ports.

Mode

All command modes.

Examples

This example clears RADIUS-snooping configuration on all ports:

System(rw)->clear radius-snooping port all

This example clears RADIUS-snooping configuration on port ge.1.1:

System(rw)->clear radius-snooping port ge.1.1
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page