show rmon event

Example

This example shows how to display RMON event entry 1:

System(rw)->show rmon event 1
Index 1
----------------
Owner          = deepak1
Status         = valid
Description    = event1check
Type           = log-and-trap
Community      =
Last Time Sent = 0 days 0 hours 0 minutes 1 seconds
Log Number 1 for Index 1 occurred at 0 days 0 hours 0 minutes 1 seconds
RisingAlarm: alarmIndex 1, alarmVariable 1.3.6.1.2.1.16.1.1.1.5.3029, alarmSampleType 1, alarmValue 0, alarmRisingThreshold 0
System(rw)->

show rmon event Output Details provides an explanation of the command output.

show rmon event Output Details

Output...	What it displays...
Index	Index number for this event entry.
Owner	Text string identifying who configured this entry.
Status	Whether this event entry is enabled (valid) or disabled.
Description	Text string description of this event.
Type	Whether the event notification will be a log entry, an SNMP trap, both, or none.
Community	SNMP community name if message type is set to trap.
Last Time Sent	When an event notification matching this entry was sent.