Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear policy port-hit (S-, K-Series)

Use this command to clear rule port hit indications on one or more ports.

Syntax

clear policy port-hit {all | port-list port-list}

Parameters

all | port-list port-list Clears port hit indications on all ports or on one or more specified ports.

Defaults

None.

Mode

All command modes.

Usage

Policy rule port-hits are displayed using the show policy rule port-hit command.

Example

This example shows how to clear rule port hit indications on all ports:

System(rw)->clear policy port-hit all
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page