show ip ospf border-routers

Use this command to display information about Area Border Routers (ABRs) and Autonomous System Boundary Routers (ASBRs).

Syntax

Parameters

None.

Defaults

None.

Mode

All command modes.

Example

This example shows how to display information about OSPF border routers:

System(rw)->show ip ospf border-routers
Area Border Routers:
  Area 0.0.0.0         Number of reachable:  1
                        192.168.200.1
  Area 0.0.0.1         Number of reachable:  2
                        192.168.200.1
                        192.168.201.10
Autonomous System Boundary Routers:
  Area 0.0.0.0         Number of reachable:  1
                        192.168.200.1
  Area 0.0.0.1         Number of reachable:  2
                        192.168.200.1
                        192.168.201.10

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback