ip dhcp relay information option remote-id

Use this command to modify the value of the remote-id (2) sub-option sent in the Relay Agent Information option 82.

Syntax

ip dhcp relay information option remote-id remote-id
no ip dhcp relay information option remote-id [remote-id]

Parameters

remote-id Specifies the value of the remote-id sub-option as an ASCII string.

Defaults

None.

Mode

Configuration command, Global configuration.

Configuration command, Interface configuration.

Usage

If the ip dhcp relay information option command has been executed, the remote-id sub-option is included in the DHCP Relay Agent packet sent to the server, using a default value of the MAC address of the chassis.

Use this command to change the value of the remote-id sub-option.

Example

This example configures sending the circuit-id (1) and remote-id (2) sub-options of the Relay Agent Information option (82) in the relay agent DHCP packet, then changes the value of the remote-id option to remoteid_blue.

System(su)->configure
System(su-config)->ip dhcp relay information option
System(su-config)->ip dhcp relay information option remote-id remoteid_blue