Use this command to set the Loop Protect event window value in seconds.
| value | Specifies the number of seconds that comprise the period during which Loop Protect events are counted. The default event window is 180 seconds. |
None.
All command modes.
The Loop Protect Window is a timer value, in seconds, that defines a period during which Loop Protect events are counted. The default value is 180 seconds. If the timer is set to 0, the event counter is not reset until the Loop Protect event threshold is reached. If the threshold is reached, that constitutes a loop protection event.
This example shows how to set the Loop Protect event window to 120 seconds:
System(rw)->set spantree lpwindow 120
Print
this page
Email this topic
Feedback
View PDF
Download EPUB