show openflow controller

Example

The following example shows typical output of the show openflow controller:

SSA Chassis(su)->show openflow controller  
OpenFlow Status 
============================================================ 
OpenFlow Admin        : Enabled 
OpenFlow Status       : Enabled 
DatapathID            : 35955747815607 

Controller Status 
============================================================ 
Target                : tcp:10.51.1.185 
Type                  : TCP 
Mode                  : In-Band Active 
Rate Limit            : 1000 
Burst Limit           : 250 
Is Connected          : TRUE 
Role                  : EQUAL 
Packets Sent          : 7 
Packets Received      : 11 
last_error            : S_errno_ETIMEDOUT 
state                 : IDLE 
sec_since_connect     : 6 
sec_since_disconnect  : 7 

Target                : pssl:10.1.1.1:6653 
Type                  : TLS 
Mode                  : In-Band Passive 
Rate Limit            : 1000 
Burst Limit           : 250 
Is Connected          : FALSE