Use this command to display multiple authentication trap settings for the specified context.
| system | Displays the multiple authentication trap system setting. |
| module | Displays the multiple authentication trap module setting. |
| port portstring | Displays the configuration setting for MultiAuth port traps for the port specified in portstring. |
If no parameter is specified, statistics for all traps are displayed.
All command modes.
This example shows how to display multiple authentication trap settings for port ge.1.1-4:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(rw)->show multiauth trap port ge.1.1-4
Location Trap configuration
Success Failed Terminated Max-Reached
------------- ---------- ---------- ---------- ----------
ge.1.1 Disabled Disabled Disabled Disabled
ge.1.2 Disabled Disabled Disabled Disabled
ge.1.3 Disabled Disabled Disabled Disabled
ge.1.4 Disabled Disabled Disabled Disabled
System(rw)->
This example shows how to display the multiple authentication trap system setting:
System(rw)->show multiauth trap system System : Disabled System(rw)->