set snmp notifyprofile

Use this command to create an SNMP notify filter profile configuration.

Syntax

set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]

Parameters

`profile`	Specifies an SNMP filter notify name.
targetparam `targetparam`	Specifies an associated entry in the SNMP Target Params Table.
volatile \| nonvolatile	(Optional) Specifies a storage type.

Defaults

If storage type is not specified, nonvolatile (permanent) will be applied.

Mode

All command modes.

Usage

This associates an existing notification filter, created with the set snmp notifyfilter command (set snmp notifyfilter), to a set of SNMP target parameters to determine which management targets should not receive SNMP notifications.

Example

This example shows how to create an SNMP notify profile named area51 and associate a target parameters entry.

System(rw)->set snmp notifyprofile area51 targetparam v3ExampleParams

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback