Use this command to return the Loop Protect status per port and optionally, per SID, to its default state of disabled.
| port-string | Specifies port(s) for which to clear the Loop Protect feature status. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
| sid sid | (Optional) Specifies the specific Spanning Tree(s) for which to clear the Loop Protect feature status. Valid values are 0 - 4094. If not specified, SID 0 is assumed. |
If no SID is specified, SID 0 is assumed.
All command modes.
This example shows how to return the Loop Protect state on ge.2.3 to disabled:
System(rw)->clear spantree lp port ge.2.3
Print
this page
Email this topic
Feedback
View PDF
Download EPUB