Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear radius accounting

Use this command to clear RADIUS accounting configuration settings.

Syntax

clear radius accounting {[server{index | all}] [retries {index | all}] [timeout {index | all}] [intervalminimum] [updateinterval]}

Parameters

server index | all Clears the configuration on one or more accounting servers.
retries index | all Resets the retries to the default value of 2 on one or more accounting servers.
timeout index | all Resets the timeout to 5 seconds on one or more accounting servers.
intervalminimum Resets the minimum interval to 600 seconds.
updateinterval Resets the update interval to 1800 seconds.

Defaults

None.

Mode

All command modes.

Example

This example shows how to reset the RADIUS accounting timeout to 5 seconds on all servers:

System(rw)->clear radius accounting timeout all

Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page