set cos reference txq (S-, K-Series)

Use this command to set a Class of Service transmit queue reference configuration.

Syntax

set cos reference txq group-type-index reference queue number

`group-type-index`	Specifies a transmit queue port group-type index for this entry. Valid entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1.
`reference`	Specifies a reference number to be associated with this entry.
queue `number`	Specifies a transmit queue resource ID to bind to this entry.

None.

All command modes.

This example shows how to configure transmit queue reference resource entry 0 for port group 0.1 referencing resources defined by TXQ entry 0:

System(rw)->set cos reference txq 0.1 0 queue 0

Published May 2016prev | next