Use this command to display the status of SNMP trap messaging on one or more ports.
| port-string | (Optional) Displays MAC address traps for specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
If port-string is not specified, moved MAC address traps for all ports will be displayed.
All command modes.
This example shows how to display the status of moved MAC address traps on ge.1.1 through 3:
System(rw)->show movedaddrtrap ge.1.1-3 Moved Address Traps Globally enabled Port Enable State --------- ------------ ge.1.1 enabled ge.1.2 enabled ge.1.3 enabled
Print
this page
Email this topic
Feedback
View PDF
Download EPUB