Use this command to force the firmware upgrade to simultaneously upgrade all remaining HAU groups.
None.
None
All command modes.
Once HAU is started, it cannot be cancelled or aborted. However, it is possible to force a running HAU to complete immediately. This command causes the immediate and simultaneous upgrade of all slots which have yet to be upgraded. Although all slots in the system are upgraded to the target image, the force complete action compromises the high availability aspect of the upgrade and should only be used when there is good reason to complete the upgrade as quickly as possible.
This example shows how to force all remaining non-upgraded HAU groups to simultaneously upgrade:
System(rw)->set boot high-availability force-complete This command will force immediate completion of the in-progress High-Availability Upgrade by simultaneously resetting all pending and failed slots. This will compromise the high-availability aspect of the upgrade. Do you want to do this now (y/n) [n]?y Forcing High-Availability Upgrade Completion ...