ipv6 pim static-rp-override

Use this command to control whether static RP configurations will override dynamic RP information learned for IPv6 groups.

Syntax

no ipv6 pim static-rp-override

Defaults

None.

Mode

Configuration command.

Usage

The static RP override feature is enabled by default. If both static and dynamic RP configurations exist, by default the static RP configurations take precedence over the dynamic RP configurations. Disabling this command allows dynamic RP configurations to take precedence over static RP configurations.

The “no” form of this command disables the static RP override feature.

Examples

This example disables static RP override for this device, allowing dynamic RP configurations to take precedence over static RP configurations:

System(su-config)->no ipv6 pim static-rp-override

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback