Use this command to configure an HAU group.
| group-id | Specifies an HAU group. Valid values are 1 — 128. |
| slot(s) | Specifies one or more group member slots. Multiple slots are delineated by a comma (,) or a range by hyphen (-). Valid values are 1 — maximum number of supported device slots. |
HAU groups default to one group per slot.
All command modes.
The HAU group feature provides for the simultaneous upgrade of all modules within a group. This capability provides the benefit of minimizing total upgrade time for the system.
All essential system capabilities on the device should be configured across multiple groups. For example, all LAGs configured on the device should provide sufficient redundancy for packets to continue forwarding on the LAG using slots belonging to an HAU group that is not upgrading.
This example shows how to configure HAU group 1 for slots 1 and 4:
System(rw)->set boot high-availability group 1 1,4 System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB