Use this command to reset the PFC setting for the link delay allowance to the default value.
| port-string | Specifies the port to reset the PFC setting to the default value of disabled. |
| link-delay-allowance | Resets link delay allowance for the specified port to the default value. |
The link delay allowance default value is module specific (see the CLI command help for details).
All command modes.
This example resets the PFC link delay allowance to the default value for this device on all ports:
System(rw)->clear dcb pfc *.*.* link-delay-allowance
Print
this page
Email this topic
Feedback
View PDF
Download EPUB