set port oam status

Use this command to enable or disable Operations, Administration, and Maintenance (OAM) port status on the specified port.

Syntax

set port oam port-string status {enable | disable}

Parameters

port-string Specifies the port(s) to enable or disable OAM status on. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide.
enable | disable Enable or disable OAM operations for a port. The default value is disabled.

Defaults

None.

Mode

All command modes.

Usage

This command enables or disables Ethernet OAM operations on the specified port. The default status is disabled.

Example

This example shows how to enable OAM operations on ports ge.1.3 through ge.1.5:

System(rw)->set port oam ge.1.3-5 status enable