Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set lldp port trap

Use this command to enable or disable sending LLDP notifications (traps) when a remote system change is detected.

Syntax

set lldp port trap {enable | disable} port-string

Parameters

enable Enables transmitting LLDP traps on the specified ports.
disable Disables transmitting LLDP traps on the specified ports.
port-string Specifies the port or range of ports to be affected.

Defaults

None.

Mode

All command modes.

Example

This example enables transmitting LLDP traps on ports ge.1.1 through ge.1.6.

System(rw)->set lldp port trap enable ge.1.1-6
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page