set lldp port location-info

Use this command to configure LLDP-MED location information on a port or range of ports. Currently, only Emergency Call Services (ECS) Emergency Location Identification Number (ELIN) is supported.

Syntax

set lldp port location-info elin value port-string

Parameters

elin Specifies that the ECS ELIN data format is to be used.
value Specifies the location identifier. Value can be from 10 to 25 numerical characters.
port-string Specifies the port or range of ports to be affected.

Defaults

None.

Mode

All command modes.

Usage

The Emergency Location Identification Number (ELIN) is a valid North America Numbering Plan format telephone number, supplied to the Public Safety Answering Point (PSAP) for Emergency Call System (ECS) purposes.

After you configure a location information value, you must also configure the port to send the Location Information TLV with the command.

Example

This example configures the ELIN identifier 5551234567 on ports ge.1.1 through ge.1.6 and then configures the ports to send the Location Information TLV.

System(rw)->set lldp port location-info 5551234567 ge.1.1-6
System(rw)->set lldp port tx-tlv med-loc ge.1.1-6