show ip dvmrp

Use this command to display DVMRP interface, neighbor, and route summary information.

Syntax

show ip dvmrp

Parameters

None.

Defaults

None.

Mode

Configuration command, any router mode.

Example

System(rw)->show ip dvmrp
[DVMRP router information]
 DVMRP prune life time is 600 seconds
[DVMRP interface information]
Interface    Interface Address   MaskLen   Status    Metric    Nbr Count
----------------------------------------------------------------------------
vlan.0.390   139.3.9.1           28        UP        1         0
vlan.0.930   ----                0         DOWN      1         0
vlan.0.3100  168.3.1.2           26        UP        1         1
vlan.0.3200  168.3.2.218         16        UP        1         1
[DVMRP neighbor information]
Neighbor Address  Interface   GenerationID   Uptime          Expire
----------------------------------------------------------------------------
168.3.1.1         vlan.0.3100 0x128f1648     5d, 17:20:53    00:00:31
168.3.2.210       vlan.0.3200 0x128f0fe7     5d, 17:04:51    00:00:27
[DVMRP route summary information]
The number of DVMRP routes is  25