clear cos port-resource irl

Use this command to clear one or all Class of Service inbound rate limiting port resource configurations.

Syntax

clear cos port-resource irl {all | group-type-index resource} [unit] [rate] [type] [syslog] [trap] [disable-port] [violators port-list]

all \| `group-type-index`	Clears all inbound rate limiting port resource entries or a specific entry. Valid group-type entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1 for the S- and K-Series and 0 for the 7100-Series.
`resource`	Specifies a single or range of resource entries to be cleared.
unit	(Optional) Clears the unit of measure setting.
rate	(Optional) Clears the data rate setting.
type	(Optional) Clears the type of action setting.
syslog	(Optional) Clears the Syslog setting (S-, K-Series).
trap	(Optional) Clears the SNMP trap setting (S-, K-Series).
disable-port	(Optional) Clears the disable port setting (S-, K-Series).
violators `port-list`	(Optional) Clears the limit violation setting (S-, K-Series).

If no options are specified, all non-default settings will be cleared for the associated rate limiter.

All command modes.

This S- and K-Series example shows how to clear all inbound rate limiting settings associated with port group 0.1, resource entry 0:

System(rw)->clear cos port-resource irl 0.1 0

This 7100-Series example shows how to clear all inbound rate limiting settings associated with port group 0.0, resource entry 0:

System(rw)->clear cos port-resource irl 0.0 0

Published May 2016prev | next