show sntp

Example

This example shows how to display SNTP client settings:

show sntp
SNTP Version: 4
Current Time: FRI MAY 06 15:33:53 2011
Timezone: 'EDT', offset from UTC is -4 hours and 0 minutes
Client Mode: unicast
Broadcast Delay: 3000 microseconds
Broadcast Count: 0
Poll Interval: 600 seconds
Poll Retry: 2
Poll Timeout: 5 seconds
SNTP Poll Requests: 2
Last SNTP Update: MON MAY 02 14:42:52 2011
Last SNTP Request: MON MAY 02 14:42:52 2011
Last SNTP Status: Enabled
SNTP Servers:
Status        Precedence     Key        SNTP-Server
-----------------------------------------------------------------------
Active             1          1         10.21.1.100
SNTP Authentication: Enabled
Status        Key            Type         Trusted
-----------------------------------------------------------------------
Active        1             MD5           Enabled
System(rw)->

show sntp Output Details provides an explanation of the command output.

show sntp Output Details

Output...	What it displays...
SNTP Version	SNTP version number.
Current Time	Current time on the system clock.
Timezone	Time zone name and amount it is offset from UTC (Universal Time). Set using set timezone.
Client Mode	Whether SNTP client is operating in unicast or broadcast mode. Set using set sntp client.
Broadcast Delay	Round trip delay for SNTP broadcast frames. Default of 3000 microseconds can be reset using set sntp broadcastdelay.
Broadcast Count	Number of SNTP broadcast frames received.
Poll Interval	Interval between SNTP unicast requests. Default of 512 seconds can be reset using set sntp poll-interval.
Poll Retry	Number of poll retries to a unicast SNTP server. Default of 1 can be reset using set sntp poll-retry.
Poll Timeout	Timeout for a response to a unicast SNTP request. Default of 5 seconds can be reset using clear sntp poll-timeout.
SNTP Poll Requests	Total number of SNTP poll requests.
Last SNTP Update	Date and time of most recent SNTP update.
Last SNTP Request	Date and time of most recent SNTP update.
Last SNTP Status	Whether or not broadcast reception or unicast transmission and reception was successful.
Status (SNTP Server)	Whether or not the SNTP server is active.
Precedence	Precedence level of SNTP server in relation to its peers. Highest precedence is 1 and lowest is 10. Default of 1 can be reset using set sntp server.
Key (SNTP Server)	The SNTP authentication key for this server.
SNTP-Server	IP address(es) of SNTP server(s).
SNTP Authentication	Whether SNTP authentication is enabled or not.
Status (SNTP Authentication)	Whether SNTP authentication is trusted or not
Key (SNTP Authentication)	SNTP authentication key configured for this client.
Type	SNTP authentication type configured for this client.