Use this command to configure a source port for this IKE map.
| port | Specifies an SA source device port for this IKE map. The default value is any port. |
None.
IKE map configuration.
Use this command to specify a source port for this SA when a specific protocol such as HTTPS is being authenticated.
Use the “no” option for this command to reset the IKE map source port configuration to the default value of any port.
This example shows how to set the source port for this SA to the standard RADIUS port 500 for IKE map winRadius:
System(su-config)->crypto ike-map winRadius System(su-crypto-map)->src-port 500 System(su-crypto-map)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB