show cos port-resource

Use this command to display Class of Service port resource configuration information.

Syntax

show cos port-resource [irl | txq | flood-ctrl] group-type-index [resource] [violators]

irl \| txq \| flood-ctrl	(Optional) Displays inbound rate limiting, transmit queue, or flood control information.
`group-type-index`	(Optional) Displays information for a specific port group-type index. Valid entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1 for the S- and K-Series and 0 for the 7100-Series.
`resource`	(Optional) Displays rate limiters, transmit queues, or flood-ctrl resources associated with this entry as a single or range of resources.
violators	(Optional) Displays ports that have violated inbound rate limiters (S-, K-Series).

If no options are specified, all rate limiting information for all port types will be displayed.

All command modes.

This example shows how to show all inbound rate limiting port resource configuration information for port group 0.1 on the S- and K-Series:

System(rw)->show cos port-resource irl 0.1

This example shows how to show all inbound rate limiting port resource configuration information for port group 0.0 on the 7100-Series:

System(rw)->show cos port-resource irl 0.0

Published May 2016prev | next