Use this command to display port broadcast suppression information for one or more ports.
| port-string | (Optional) Displays broadcast status for specific port(s). |
If port-string is not specified, broadcast status of all ports will be displayed.
All command modes.
The Peak Rate reflects the peak rate of broadcast packets to the CPU. The 7100-Series platform does not report the peak rate going through the device, but may instead report a more limited value such as the packets seen by the host.
This example shows how to display broadcast information for port ge.2.2:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(rw)->show port broadcast ge.2.2
Port Total BC Threshold Peak Rate Peak Rate Time
Packets (pkts/s) (pkts/s) (ddd:hh:mm:ss)
-----------------------------------------------------------------------
ge.2.2 165 148810 8 000:05:57:37
show port broadcast Output Details provides an explanation of the command output.
show port broadcast Output Details
| Output... | What it displays... |
|---|---|
| Port | Port designation. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
| Total BC Packets | Total broadcast packets received on this port. |
| Threshold (pkts/s) | Current broadcast threshold in packets per second on this port. |
| Peak Rate (pkts/s) | Peak rate of broadcast transmission received on this port in packets per second. |
| Peak Rate Time (ddd:hh:mm:ss) | Time (in day, hours, minutes and seconds) the peak rate was reached on this port. |