show cos settings

Use this command to display Class of Service parameters.

Syntax

show cos settings [cos]

Parameters

cos

(Optional) Specifies a Class of Service entry to display.

Defaults

If no CoS entry is specified, all CoS entries will be displayed.

Mode

All command modes.

Examples

This S- and K-Series example shows how to display the CoS settings for CoS entry 0:

System(rw)->show cos settings 0
 * Means attribute has not been configured
CoS Index  Priority    ToS      TxQ    IRL    ORL    Drop Prec Flood-Ctrl
---------  ----------  -------  -----  -----  -----  --------- ----------
0          0           *        0      *      *      *         Disabled

This 7100-Series example shows how to display the CoS settings for CoS entry 0:

System(rw)->show cos settings 0
 * Means attribute has not been configured
CoS Index  Priority    ToS      TxQ    IRL    Flood-Ctrl
---------  ----------  -------  -----  -----  ----------
0          0           *        0      *      Enabled

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback