Use this command to enter system level Default Maintenance Domain (MD) Configuration mode, to configure either default MD values or default MD per-VLAN values.
| default | Enter “Default Maintenance Domain (MD)” mode to configure system level default maintenance domain values. |
| vlan vlan-id | Enter “Default Maintenance Domain (MD)” mode for a specific VLAN to configure default maintenance domain values. |
None.
Global configuration command.
The “no” form of this command resets any system Default MD mode configuration to default values.
When you use the default parameter, you move into Default Maintenance Domain mode and can configure system level default values for maintenance domains. When you use the vid parameter, you move into Default Maintenance Domain mode for a specific VLAN and can configure default values for that VLAN.
Refer to Default Maintenance Domain (MD) Configuration Commands for commands available in the Default Maintenance Domain configuration mode.
This example shows how to enter the system level default MD configuration command mode. Note that the command prompt changes to indicate that you have moved to Default Maintenance Domain mode for configuring default maintenance domain values.
System(rw-config)->cfm default-md default System(su-config-cfm-default-md-def)->
This example enters default configuration mode for VLAN 20. Note that the command prompt changes to indicate that you have moved to Default Maintenance Domain mode for configuring VLAN 20.
System(rw-config)->cfm default-md vid 20 System(su-config-cfm-default-md.20)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB