Use this command to display the current TACACS+ configuration information and status.
| state | (Optional) Displays only the TACACS+ client status. |
If state is not specified, all TACACS+ configuration information will be displayed.
All command modes.
This example shows how to display all TACACS configuration information:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(ro)->show tacacs
TACACS+ state: enabled
TACACS+ session accounting state: disabled
TACACS+ command authorization state: disabled
TACACS+ command accounting state: disabled
TACACS+ single-connect state: disabled
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
access level attribute value
read-only 'priv-lvl' '0'
read-write 'priv-lvl' '1'
super-user 'priv-lvl' '15'
TACACS+ Server IP Address Port Timeout Status
-------------- --------------- ----- ------- -------
1 10.1.26.245 49 10 Active
show tacacs Output Details provides an explanation of the command output.
show tacacs Output Details
| Output... | What it displays... |
|---|---|
| TACACS+ state | Whether the TACACS+ client is enabled or disabled. |
| TACACS+ session accounting state | Whether TACACS+ session accounting is enabled or disabled. |
| TACACS+ command authorization state | Whether TACACS+ command authorization is enabled or disabled. |
| TACACS+ command accounting state | Whether TACACS+ command accounting is enabled or disabled. |
| TACACS+ singleconnect state | Whether TACACS+ singleconnect is enabled or disabled. When enabled, the TACACS+ client sends multiple requests over a single TCP connection. |
| TACACS+ service | The name of the service that is requested by the TACACS+ client for session authorization. “exec” is the default service name. |
| TACACS+ session authorization A-V pairs | Displays the attribute – value pairs that are mapped to the Extreme Networks read-only, read-write, and super-user access privilege levels for the service requested for session authorization. The attribute names and values shown in the example above are the default values. |
| TACACS+ Server | Displays the TACACS+ server information used by the TACACS+ client. |