show ike policy

Use this command to display IKE policy configuration.

Syntax

show ike policy

Parameters

None.

Defaults

None.

Mode

All command modes.

Example

This example shows how to display IKE policy:

System(su)->show ike policy
IPIke policy winRadiusV6 (index 0)
 Proposal:                 winRadiusV6_main
 Lifetime:                 60 minutes
 Exchange versions:        1
 Passive mode:             disabled
 Initial contact:          enabled
 Keepalive:                0
 Local:                    2001:4094::102 (mgmt)
 Peer:                     2001:14::172:1:191:210
 Authentication type:      pre_shared_key
 Authentication data:      :a8c78abe01874ec1096808973dcec135015db26d:
 Valid config:             yes
 Status flags:
IPIke policy winRadius (index 1)
 Proposal:                 winRadius_main
 Lifetime:                 60 minutes
 Exchange versions:        1
 Passive mode:             disabled
 Initial contact:          enabled
 Keepalive:                0
 Local:                    1.1.191.6 (mgmt)
 Peer:                     1.1.191.22
 Authentication type:      pre_shared_key
 Authentication data:      :364567b02e23c1f6418c85f3162085ef7718c180:
 Valid config:             yes
 Status flags:
System(su)->