Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear inlinepower threshold

Use this command to reset the PoE usage threshold on a specified module to the default value of 75 percent.

Syntax

clear inlinepower threshold module-number

Parameters

module-number Specifies the module on which to reset the PoE threshold. If you are clearing the threshold value on an S-Series SSA, use 1 as the module number.

Defaults

None.

Mode

All command modes.

Example

This example shows how to reset the PoE threshold to 75 on module 1:

System(rw)->clear inlinepower threshold 1
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page