show mld config

Use this command to show the MLD configuration information for one or more VLANs.

Syntax

show mld config [vlan-list]

Parameters

vlan-list (Optional) Displays the MLD configuration information for the specified VLAN(s). Valid values are 1 – 4094.

Defaults

If a vlan-list is not specified, all MLD configured VLANs display.

Mode

All command modes.

Example

This example displays the MLD configuration settings for VLAN 2501:

System(rw)->show mld config 2501
MLD config for vlan 2501
-----------------------------------
QueryInterval(sec.)         - 125
Status                      - Active
Version                     - 2
QueryMaxResponseTime(sec.)  - 10
Robustness                  - 2
LastMemberQueryIntvl        - 10
FastLeaveState              - Disabled
QuerierUpTime               - 0 D  22 H  31 M  25 S
QuerierExpiryTime           - 0 D  0 H  0 M  0 S
QuerierIP                   - fe80::21f:45ff:fe5b:f5cf
System(rw)->