Use this command to display the RADIUS accounting configuration.
| updateinterval | (Optional) Displays the number of seconds between each RADIUS accounting interim update (when accumulated accounting data is sent to the server for a session.) |
| intervalminimum | (Optional) Displays the minimum update interval setting. This controls the frequency of RADIUS accounting updates. |
| state | (Optional) Displays the RADIUS accounting enable state. |
| server index | all | (Optional) Displays one or all RADIUS accounting server configurations. |
| verbose | Displays detailed server information. |
If no parameters are specified, all RADIUS accounting configuration information will be displayed.
All command modes.
RADIUS accounting transmits accounting information between a network access server and a shared accounting server.
This example shows how to display RADIUS accounting configuration information. In this case, RADIUS accounting is enabled and global default settings have not been changed. One server has been configured. The Extreme Networks S- K- and 7100-Series device allows for up to 10 RADIUS accounting servers to be configured, with up to 2 active at any given time.
For details on enabling and configuring RADIUS accounting, refer to set radius accounting:
System(rw)->show radius accounting Accounting state: Enabled Accounting update interval: 1800 secs Accounting interval minimum: 600 secs Server Server Acct Index IP Port Retries Timeout Status ----------------------------------------------------------------- 1 1.1.1.1 1236 2 5 Primary
Print
this page
Email this topic
Feedback
View PDF
Download EPUB