show ipv6 slb serverfarms

Use this command to display IPv6 Server Load Balancing (SLB) server farm information.

Syntax

show ipv6 slb serverfarms [detail | serverfarmname]

Parameters

detail	(Optional) Displays detailed output for a specific server farm or for all configured server farms.
`serverfarmname`	(Optional) Specifies a server farm name of up to 63 characters in length for which to display information.

Defaults

If no parameter is specified, summary information for all configured server farms will be displayed.

Mode

All command modes.

Example

This example shows how to display a detailed level of IPv6 LSNAT server farm information:

System(rw)->show ipv6 slb serverfarms detail
Server-Farm: http-farm (ACTIVE) (IPv6)
   Predictor:                ROUND-ROBIN Connections:                 24037
   Reals Configured:                   5 Hits:                        24038
   Reals Up:                           5 State Changes:                   1
   VServers Configured:                1
   Last state change:   MON JUL 16 13:59:14 2012
Server-Farm: smtp-farm (ACTIVE) (IPv6)
   Predictor:                ROUND-ROBIN Connections:                  9508
   Reals Configured:                   5 Hits:                         9508
   Reals Up:                           5 State Changes:                   1
   VServers Configured:                1
   Last state change:   MON JUL 16 13:59:14 2012
Serverfarms in active state: 2

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback