Use this command to display summary tables of IPv4 PIM interfaces, neighbors, BSR, and group-to-RP mappings.
None.
None.
All command modes.
System(su)->show ip pim [PIM Interfaces] Interface Address Nbr Hello DR Status DR-Address Count Intvl Priority ------------------------------------------------------------------------------ vlan.0.2334 192.233.4.4 1 30 1 UP 192.233.4.4 vlan.0.2501 10.51.0.1 0 30 1 UP 10.51.0.1 vlan.0.2502 10.52.0.1 0 30 1 UP 10.52.0.1 vlan.0.2503 10.53.0.1 0 30 1 UP 10.53.0.1 vlan.0.2504 10.54.0.1 0 30 1 UP 10.54.0.1 vlan.0.2601 10.61.0.1 0 30 1 UP 10.61.0.1 vlan.0.3014 192.168.14.4 1 30 1 UP 192.168.14.4 vlan.0.3024 192.168.24.4 1 30 1 UP 192.168.24.4 vlan.0.3034 192.168.34.4 1 30 1 UP 192.168.34.4 9 PIM enabled interfaces [PIM Neighbors] Neighbor Address Interface DR Priority Uptime Expires ------------------------------------------------------------------------------ 192.233.4.3 vlan.0.2334 1 04:47:56 00:01:28 192.168.14.1 vlan.0.3014 1 04:47:57 00:01:28 192.168.24.2 vlan.0.3024 1 04:47:47 00:01:38 192.168.34.3 vlan.0.3034 1 04:47:55 00:01:30 4 PIM neighbors [PIM BSR] PIMv2 Elected Bootstrap Router Information: BSR Address: 172.16.1.1 BSR Hash Mask Length: 30 BSR Priority: 100 BSR Expire: 00:01:20 [PIM Group-To-RP Mappings] Group Range RP Address Mode Active Origin Anycast ------------------------------------------------------------------------ 232.0.0.0/8 0.0.0.0 SSM Yes Static no-info 224.0.0.0/4 172.16.1.2 ASM Yes BSR no-info 224.0.0.0/4 172.16.2.2 ASM No BSR no-info 224.0.0.0/8 172.16.1.1 ASM Yes BSR no-info 4 PIM Group to RP mappings (1 static, 3 via BSR)