Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear inlinepower psetrap

Use this command to reset PoE trap messaging for a module back to the default state of disabled.

Syntax

clear inlinepower psetrap module-number

Parameters

module-number Specifies the module on which to clear PoE trap messaging. If you are clearing this value on an S-Series, use 1 as the module number.

Defaults

None.

Mode

All command modes.

Example

This example shows how to reset PoE trap messaging for module 1 to disabled:

System(rw)->clear inlinepower psetrap 1
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page