set dcb cn priority status

Use this command to enable or disable the activation of the specified CNPV for all ports on the switch.

Syntax

set dcb cn priority priority status {enable | disable}

Parameters

`priority`	Specifies a CNPV to apply the specified activation state to on this switch.
enable \| disable	Specifies whether a configured CNPV is activated or not activated: enable – The CNPV is activated disable – The CNPV is not activated

Defaults

The default CNPV status is activated.

Mode

All command modes.

Usage

Congestion notification only takes place for activated CNPVs. The priority status is enabled by default when creating a CNPV using any options supported by the set dcb cn priority command. Use this command to either disable or re-enable CNPV activation status.

Examples

This example deactivates CNPV 3 on all ports for this switch:

System(rw)->set dcb cn priority 3 status disable

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback