show ip slb serverfarms

Use this command to display IPv4 Server Load Balancing (SLB) server farm information.

Syntax

show ip slb serverfarms [detail | serverfarmname]

Parameters

detail	(Optional) Displays detailed output for a specific server farm or for all configured server farms.
`serverfarmname`	(Optional) Specifies a server farm name of up to 63 characters in length for which to display information.

Defaults

If no parameter is specified, summary information for all configured server farms will be displayed.

Mode

All command modes.

Example

This example shows how to display a detailed level of IPv4 LSNAT server farm information:

System(rw)->show ip slb serverfarms
reals reals
server-farm                      status   cfg   up    conns hits
----------------------------------------------------------------
portt                            ACTIVE   1     1     0     0
ftp-sf                           ACTIVE   1     1     0     0
v4_sf_all                        ACTIVE   1     1     0     0
v4_tftp_sf                       ACTIVE   1     1     0     0
Serverfarms in active state: 4

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback