Use this command to display port VLAN identifier (PVID) information.
| port-string | (Optional) Displays PVID information for specific port(s). For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
If port -string is not specified, port VLAN information for all ports will be displayed.
All command modes.
PVID determines the VLAN to which all untagged frames received on one or more ports will be classified.
This example shows how to display PVIDs assigned to ports 1 through 6. In this case, untagged frames received on these ports will be classified to VLAN 1:
System(rw)->show port vlan ge.2.1-6 ge.2.1 is set to 1 ge.2.2 is set to 1 ge.2.3 is set to 1 ge.2.4 is set to 1 ge.2.5 is set to 1 ge.2.6 is set to 1
Print
this page
Email this topic
Feedback
View PDF
Download EPUB