set cos port-config irl

Use this command to set the Class of Service inbound rate limiting port group configuration.

Syntax

set cos port-config irl group-type-index [name name] [ports port-list] [append | clear]

`group-type-index`	(Optional) Displays information for a specific port group-type index. Valid entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1 for the S- and K-Series and 0 for the 7100-Series.
name `name`	(Optional) Specifies a name for this configuration.
ports `port-list`	(Optional) Applies this configuration to one or more ports in the port group.
append \| clear	(Optional) Appends or clears port designations from a previously configured port group.

If a name is not specified, no name is assigned to the configuration.
If the ports option is not specified, this configuration will be applied to all ports in the port group.
If append or clear are not specified, port(s) will be appended to the specified port grouping.

All command modes.

This example shows how to create a CoS inbound rate limiting port group entry named testirl with a port group ID of 1 and a port type ID of 1:

System(rw)->set cos port-config irl 1.1 name testirl

Published May 2016prev | next