Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear logging default

Use this command to reset logging default values.

Syntax

clear logging default {[facility] [severity] [port]}

Parameters

facility (Optional) Resets the default facility name to local4.
severity (Optional) Resets the default logging severity level to 6 (notifications of significant conditions).
port (Optional) Resets the default UDP port the client uses to send to the server to 514.

Defaults

  • At least one optional parameter must be entered.
  • All three optional keywords must be entered to reset all logging values to defaults.

Mode

All command modes.

Usage

If C2 security mode is enabled, You can not clear a local logging configuration while in Read-Write user mode.

Example

This example shows how to reset the Syslog default severity level to 6:

System(rw)->clear logging default severity
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page