show rmon channel (S-, K-Series)

Use this command to display RMON channel entries for one or more ports.

Syntax

show rmon channel [port-string]

Parameters

port-string

(Optional) Displays RMON channel entries for a specific port(s).

Defaults

If port-string is not specified, information about all channels will be displayed.

Mode

All command modes.

Example

This example shows how to display RMON channel information for tg.2.12:

System(rw)->show rmon channel tg.2.12
Port tg.2.12    Channel index= 628      EntryStatus= valid
----------------------------------------------------------
Control             off       AcceptType          matched
OnEventIndex        0         OffEventIndex       0
EventIndex          0         Status              ready
Matches             4498
Description         Thu Dec 16 12:57:32 EST 2004
Owner               NetSight smith

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback