set gvrp

Use this command to enable or disable GVRP globally on the device or on one or more ports.

Syntax

set gvrp {enable | disable} [port-string]

enable \| disable	Enables or disables GVRP on the device. Default: Enabled globally; Disabled at the port level.
`port-string`	(Optional) Enables or disables GVRP on specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.

If port-string is not specified, GVRP will be globally enabled or disabled.

All command modes.

This example shows how to enable GVRP globally on the device:

System(rw)->set gvrp enable

This example shows how to disable GVRP globally on the device:

System(rw)->set gvrp disable

This example shows how to enable GVRP on port 3 in slot 1:

System(rw)->set gvrp enable ge.1.3

Published May 2016prev | next