Use this command to enable (create) or disable (free up) a NetFlow cache on each module in the Extreme Networks S- or K-Series system.
| enable | disable | Enable or disable the NetFlow cache. |
None.
All command modes.
A NetFlow cache maintains NetFlow information for all active flows. By default, NetFlow caches are not created.
Use the set netflow cache enable command to enable the NetFlow cache on the system.
Use either the set netflow cache disable or the clear netflow cache command to disable the NetFlow cache on the system.
This example shows how to enable, or create, a NetFlow cache on each module in the system:
System(rw)->set netflow cache enable
Print
this page
Email this topic
Feedback
View PDF
Download EPUB