ignore-lsp-errors

Use this command to enable IS-IS to ignore link state packet checksum errors on the device.

Syntax

ignore-lsp-errors
no ignore-lsp-errors

Parameters

None.

Defaults

None.

Mode

IS-IS router configuration.

Usage

By default, IS-IS link state packets that are received with internal checksum errors are purged by the receiver. This command overrides that default behavior and simply ignores internal checksum errors for received link state packets.

The “no” form of this command restores the default behavior of purging link state packets with internal checksum errors.

Example

This example shows how to configure IS-IS to ignore link-state packet internal checksum errors:

System(rw-config)router isis
System(rw-config-isis)->ignore-lsp-errors
System(rw-config-isis)->