show mrp timer

Example

This example shows how to display MRP timer configuration for port 1 in slot 1:

System(rw)->show mrp timer ge.1.1
Port based MRP configuration: (Timer units are centiseconds)
Port Number       Join       Leave      Leaveall    Periodic
-----------    ----------  ----------  ----------  ----------
ge.1.1                 20          60        1000   disabled

show mrp timer Output Details provides an explanation of the command output.

show mrp timer Output Details

Output...	What it displays...
Port Number	Port designation for displayed MRP timer settings.
Join	Specifies the current Join timer setting. Default value is 20 centiseconds (.2 seconds).
Leave	Specifies the current Leave timer setting. Default value is 60 centiseconds (.6 seconds).
Leaveall	Specifies the current LeaveAll timer setting. Default value is 1000 centiseconds (10 seconds).
Periodic	Specifies whether the Periodic timer is enabled or disabled. The value of the Periodic timer is fixed at 1 second.