show link-state

Use this command to display information about Link-State application entries.

Syntax

show link-state [object-name [detail]]

Parameters

`object-name`	(Optional) Specifies the name of the port-group tracked object associated with the Link-State entry to display.
detail	(Optional) Specifies that detailed information should be displayed.

Defaults

If an object-name is not specified, information about all Link-State entries is displayed.

If detail is not specified, only basic information about the specified entry is displayed.

Mode

All command modes.

Examples

This example displays information about Link-State entry ls_group.

System(su)->show link-state ls_group
Link-state name                 State    Object (truncated)       Last Change
------------------------------- -------- ------------------------ -------------
ls_group                        Down     ge.1.1-5                   1d19h03m28s
------------------------------- -------- ------------------------ -------------
Displayed 1 link-state entries

This example displays detailed information about Link-State entry ls_group.

System(su)->show link-state ls_group detail
Link-state ls_group
 Ports
  Uplinks: tg.2.1-4
  Downlinks: ge.1.1-5
 State is Down, Last action shutdown downlinks
  3 state changes, last change   1d19h04m39s ago
Displayed 1 link-state entries

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback